Botou Tongyong Bellows Manufacturing Co. Ltd

A metal bellows expansion joint is considered to be an extension or compression of a piping system in its longitudinal axis, which means that the total length of the expansion joint is extended or compressed during the absorption of movement. Axial expansion joints designed to absorb large movements can contain one, two or more bellows in a single unit, or larger movements can be achieved by pretensioning or installing multiple expansion joints on a pipe section. Choosing the correct material for your metal bellows is critical. Stainless steel bellows are designed to withstand high pressures, high temperatures or critical media.   Stainless Steel Bellows Stainless steel bellows  are widely used where temperature, pressure or media prevent the use of rubber bellows. They are made of thin-walled tubes with the number of convolutions determining the available movement. For bellows units, only a relatively small amount of convolution can be safely designed before the unit becomes unstable

  We may experience duplicated failings on the same pump over and over, and despite the fact that the pump had been correctly repaired, set up, and straightened, it still experienced persistent vibration problems. A closer appearance established that the resonances were not being produced from the pump, instead it was being influenced by vibrations from various other devices as it travelled along the pipes. What can be done to quit rogue vibrations from impacting the pump? A piping expansion joint may assist. Why would certainly I need one? We described several of the big reasons  expansion joints are useful in piping systems  already, however simply to wrap up: ▴ Shock and flexing lots ▴ Thermal expansion of piping ▴ Pump as well as equipment vibration ▴ Address initial piping misalignment and settlement side offsets Your entire procedure is intertwined, each piece influences the following. Having a reputable piping system is essential to a process that makes best use of uptime. Thoro

An expansion joint is installed in piping systems for a number of factors. Not only can they be made use of to take in vibrations as well as shock, they can also be used to relieve anchor anxiety, lower sound, and also make up for imbalance. Particular expansion joints are additionally developed for thermal expansion in extremely hot applications. Expansion joints enable pipes to move in three different ways: ▴ Lateral offset ▴ Angular deflection ▴ Axial compression or expansion They typically are available in 3 various materials to cover a variety of applications. Braided Braided stainless pipes with flexible or metal linings aren't practically an expansion joint, even more of an adaptable connector.  They work well in high pressure and temperature  applications needing resonance moistening or pipe misalignments. Metal Metal expansion joints are mainly used in applications where thermal expansion is a problem. When the temperature of the pipe enhances, the metal expansion joint c